HP t5740 Troubleshooting Guide: HP t5740/t5745 Thin Clients and HP st5742/st57 - Page 31

4 BIOS Settings, (F10) Utility Using the BIOS Settings Intel Atom N280 processors and the Intel chipset are used in the HP t5740/t5745 and HP st5742/ st5747 Streaming Thin Client products. Changing BIOS Settings from the repset utility Some BIOS settings may be changed locally within the operating system without having to go through the F10 utility1. This table identifies the items that can be controlled with this method. BIOS Setting 1st Boot Device 2nd Boot Device 3rd Boot Device Boot Up NumLock F12 Boot Integrated Audio Network Controller Serial Port 1 Default Value USB Hard Drive Network Off Enabled Enabled Enabled 3F8/IRQ4 Serial Port 2 2F8/IRQ3 Parallel Port PWRON After PWR-Fail Wake-on-LAN BIOS Wake Up Asset Tag No Setup Password Power-On Password Parallel Mode ECP Mode Use DMA USB Controller 378/IRQ7 Former State Enabled Disabled 000000000000000000 blank blank ECP/EPP DMA3 Enabled Other Values Hard Drive, Network, Disabled USB, Network, Disabled Hard Drive, USB, Disabled On Disabled Disabled Disabled Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/ IRQ3 Disabled, 3F8/IRQ4, 3E8/IRQ4, 2E8/ IRQ3 Disabled, 278/IRQ5, 3BC/IRQ7 On, Off Disabled Enabled, days of the week & time User input (18 chars) User input (8 chars max) User input (8 chars max) Standard, EPP, ECP DMA1 Disabled Using the BIOS Settings 23