HP t620 Hardware Reference Guide - Page 27

then release the latch., assembly latch 1 toward the front of the computer

Get HP t620 PDF manuals and user guides View all HP t620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

14. Hold the memory compartment cover with the fiber NIC slot toward the front of the computer, and then set the memory compartment cover (1) over the SODIMMs. 15. If a fiber NIC is installed, move the cable carefully into the slot in the memory compartment cover. 16. Line up the screw holes in the memory cover with the screw posts in the chassis, and then fasten the two screws (2) with the springs to secure the memory compartment cover. 17. If the computer is an HP t620 PLUS Thin Client, rotate the fan assembly down, push the fan assembly latch (1) toward the front of the computer, lower the assembly (2) until it stops, and then release the latch. 18. Replace and latch the access panel, and then reinstall the I/O panel. 19. Replace the computer stand. Installing additional memory 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
14.
Hold the memory compartment cover with the fiber NIC slot toward the front of the computer,
and then set the memory compartment cover (1) over the SODIMMs.
15.
If a fiber NIC is installed, move the cable carefully into the slot in the memory compartment
cover.
16.
Line up the screw holes in the memory cover with the screw posts in the chassis, and then
fasten the two screws (2) with the springs to secure the memory compartment cover.
17.
If the computer is an HP t620 PLUS Thin Client, rotate the fan assembly down, push the fan
assembly latch (1) toward the front of the computer, lower the assembly (2) until it stops, and
then release the latch.
18.
Replace and latch the access panel, and then reinstall the I/O panel.
19.
Replace the computer stand.
Installing additional memory
21