HP t628 Administrator Guide - Page 139
root/Network/Wired/IPv6Enable, root/Network/Wired/Security/Type
View all HP t628 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Registry key Description root/Network/Wired/DefaultGateway Sets the default gateway the device will use to communicate with the Internet. Typically this is the IP address of the router. This setting will only take effect when Method is set to Static. root/Network/Wired/EnableDefGatewayAsDNS If set to 1, the default gateway will also be the name server. root/Network/Wired/EthernetSpeed Sets the link speed of the primary Ethernet network interface. Automatic allows the fastest available link speed to be used, which is usually 1 Gbps or 100 Mbps/Full depending on the switch. The link speed can also be forced to a single speed (100 Mbps or 10 Mbps) and duplex mode (Full or Half) to support switches and hubs that do not perform appropriate auto-negotiation. root/Network/Wired/IPAddress Sets the IPv4 address of the thin client. This setting will only take effect when Method is set to Static. root/Network/Wired/IPv6Enable If set to 1, IPv6 is enabled. root/Network/Wired/Interface Sets the default Ethernet interface or NIC. root/Network/Wired/MTU Sets the MTU. It does not matter if the IP address is static or DHCP-acquired. root/Network/Wired/Method If set to Automatic, the thin client will use DHCP to attempt to retrieve network settings. If set to Static, the values of the IPAddress, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic client profile because it will cause all thin clients to receive the same IP address. root/Network/Wired/Security/CACert Sets the path to CA certificate file. root/Network/Wired/Security/EnableMachineAuth If set to 1, machine authentication for PEAP is enabled. root/Network/Wired/Security/Identity Sets the identity or anonymous identity. root/Network/Wired/Security/InnerAuth Sets the PEAP inner authentication protocol. root/Network/Wired/Security/InnerAuthTTLS Sets the TTLS inner authentication protocol. root/Network/Wired/Security/MachineAuthName Stores the machine account name when machine authentication is enabled. root/Network/Wired/Security/ MachineAuthPassword Stores the machine account password when machine authentication is enabled. root/Network/Wired/Security/PEAPVersion Sets the PEAP version. root/Network/Wired/Security/Password Sets the password. root/Network/Wired/Security/PrivateKey Sets the path to a private key file. This is only used for TLS authentication. root/Network/Wired/Security/Type Sets the 802.1x authentication type. root/Network/Wired/Security/UserCert Sets the path to a user certificate file. This is only used for TLS authentication. root/Network/Wired/Security/Username Sets the username. root/Network/Wired/SubnetMask Sets the subnet mask of the device, such as 255.255.255.0 (for a standard class C subnet). This setting will only take effect when Method is set to Static. Network 127