HP t628 Administrator Guide - Page 56
Wireless network settings, Wireless - thin client power adapter
View all HP t628 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Option Description ● 802.1X-TLS Note the following about TTLS and PEAP: ● The Inner Authentication option should be set to whatever your server supports. ● The CA Certificate setting should point to the server's certificate on the local thin client. ● The Username and Password are the user's credentials. Note the following about TLS: ● The CA Certificate setting should point to the server's certificate on the local thin client. ● If your Private Key file is .p12 or .pfx, then the User Certificate setting can be left blank. ● The Identity setting should be the username that corresponds to the user certificate. ● The Private Key Password setting is the password of the user's private key file. Wireless network settings The following table describes the options available in the Wireless tab of the Network Manager. NOTE: This tab is available only if the thin client has a wireless adapter. Option Scan AP SSID SSID Hidden Enable IPv6 Enable Power Management Connection Method Security Settings Description Scans for available wireless networks. Use this box to manually enter the SSID of the wireless network if it is not found by the scan. Enable this option if the SSID of the wireless network is set to be hidden (not broadcasting). Enables IPv6. IPv4 is used by default, and they cannot be used at the same time. Enables the power management feature for the wireless adapter. Lets you select between Automatic and Static. If your network environment is using DHCP, then the Automatic option should work without any further configurations. If Static is selected, the Static Address Configuration settings will become available. Be sure to input these values according to whether you are using IPv4 or IPv6. Lets you set the authentication setting to one of the following: ● None ● WEP ● WPA/WPA2-PSK ● 802.1X-TTLS ● 802.1X-PEAP ● 802.1X-TLS ● EAP FAST For WEP and WPA/WPA2-PSK, you just need to enter the network key and select OK. For EAP-FAST, set Anonymous Identity, Username, Password, and Provisioning Method. You do not need to change the PAC file settings. See Wired network settings on page 43 for more information about TTLS, PEAP, and TLS. 44 Chapter 5 Control Panel