Hikvision DS-2CD2332-I User Manual - Page 55
Configuring Wireless Dial Settings, Configuration >Advanced Configuration >
View all Hikvision DS-2CD2332-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
User Manual of Network Camera With the function enabled, you don't need to configure the port mapping for each port, and the camera is connected to the Wide Area Network via the router. Steps: 1. Enter the UPnP™ settings interface. Configuration >Advanced Configuration > Network > UPnP 2. Check the checkbox to enable the UPnP™ function. The name of the device when detected online can be edited. Figure 6-17 UPnP Settings 6.3.9 Configuring Wireless Dial Settings Purpose: Data stream of audio, video and image can be transferred via 3G / 4G wireless network. Note: The wireless dial function requires the support of the camera. 1. Click the Wireless Dial tab to enter the Wireless Dial configuration interface. 2. Check the checkbox of Enable to enable the wireless dial settings. 3. Configure the dial parameters. 1) Select the dial mode from the drop-down list. Auto and Manual are selectable. If Auto is selected, you can set the arming schedule for dialing; If Manual is selected, you can set the offline time and manual dialing parameters. 2) Set the access number, user name, password, APN, MTU and verification protocol. You can also leave these parameters blank, and the device will adopt the default settings for dialing after other parameters are configured. For your privacy and to better protect your system against security risks, 55