Hikvision DS-2CD2332-I User Manual - Page 59
Configuration > Advanced Configuration > Network > Email, Sender, SMTP Server, SMTP Port,
View all Hikvision DS-2CD2332-I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
User Manual of Network Camera set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server. Note: Please refer to Section 6.3.1 Configuring TCP/IP Settings for detailed information. 2. Enter the Email Settings interface: Configuration > Advanced Configuration > Network > Email Figure 6-22 Email Settings 3. Configure the following settings: Sender: The name of the email sender. Sender's Address: The email address of the sender. SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com). SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25 (not secured). And the SSL SMTP port is 465. Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP server. 59
User Manual of Network Camera
59
set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred
DNS Server.
Note:
Please refer to
Section 6.3.1
Configuring TCP/IP Settings
for detailed
information.
2.
Enter the Email Settings interface:
Configuration > Advanced Configuration > Network > Email
Figure 6-22
Email Settings
3.
Configure the following settings:
Sender:
The name of the email sender.
Sender’s Address:
The email address of the sender.
SMTP Server:
The SMTP Server IP address or host name (e.g.,
smtp.263xmail.com).
SMTP Port:
The SMTP port. The default TCP/IP port for SMTP is 25 (not
secured). And the SSL SMTP port is 465.
Enable SSL:
Check the checkbox to enable SSL if it is required by the SMTP
server.