Hikvision DS-2CD2T25FWD-I5 User Manual - Page 46
Configuring RS232 Settings, Steps, Purpose
View all Hikvision DS-2CD2T25FWD-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Network Camera User Manual 6.2.3 Configuring RS232 Settings The RS232 port can be used in two ways: Parameters Configuration: Connect a computer to the camera through the serial port. Device parameters can be configured by using software such as HyperTerminal. The serial port parameters must be the same as the serial port parameters of the camera. Transparent Channel: Connect a serial device directly to the camera. The serial device will be controlled remotely by the computer through the network. Steps: 1. Enter RS232 Port Setting interface: Configuration> System > System Settings > RS232. 2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage. Figure 6-6 RS232 Settings Note: If you want to connect the camera by the RS232 port, the parameters of the RS232 should be exactly the same with the parameters you configured here. 3. Click Save to save the settings. 6.2.4 Configuring RS485 Settings Purpose: The RS485 serial port is used to control the PTZ of the camera. The configuring of 36