Hikvision DS-2TD2117-3/6/V1 User Manual - Page 67
Network Settings, 6.1 Configuring Basic Settings,
View all Hikvision DS-2TD2117-3/6/V1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Network Camera User Manual Chapter 6 Network Settings Purpose: Follow the instructions in this chapter to configure the basic settings and advanced settings. 6.1 Configuring Basic Settings Purpose: You can configure the parameters, including TCP/IP, DDNS, PPPoE, Port, and NAT, etc., by following the instructions in this section. 6.1.1 Configuring TCP/IP Settings Purpose: TCP/IP settings must be properly configured before you operate the camera over network. The camera supports both the IPv4 and IPv6. Both versions can be configured simultaneously without conflicting to each other, and at least one IP version should be configured. Steps: 1. Enter TCP/IP Settings interface: Configuration > Network > Basic Settings > TCP/IP 54
Network Camera User Manual
54
Chapter 6
Network Settings
Purpose:
Follow the instructions in this chapter to configure the basic settings and
advanced settings.
6.1
Configuring Basic Settings
Purpose:
You can configure the parameters, including TCP/IP, DDNS, PPPoE, Port, and
NAT, etc., by following the instructions in this section.
6.1.1
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera
over network. The camera supports both the IPv4 and IPv6. Both versions can
be configured simultaneously without conflicting to each other, and at least
one IP version should be configured.
Steps:
1.
Enter TCP/IP Settings interface:
Configuration >
Network > Basic
Settings > TCP/IP