Hikvision DS-2TD2117-3/6/V1 User Manual - Page 80

Configuring Email Settings, Network > Basic Settings &gt

Get Hikvision DS-2TD2117-3/6/V1 PDF manuals and user guides View all Hikvision DS-2TD2117-3/6/V1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

Thermal Network Bullet Camera User Manual Anonymous Access to the FTP Server (in which case the user name and password won't be required.): Check the Anonymous checkbox to enable the anonymous access to the FTP server. Note: The anonymous access function must be supported by the FTP server. 6. Click Save to save the settings. 6.2.3 Configuring Email Settings Purpose: The system can be configured to send an Email notification to all designated receivers if an alarm event is detected, e.g., motion detection event, video loss, video tampering, etc. Before you start: Please configure the DNS Server settings under Configuration > Network > Basic Settings > TCP/IP before using the Email function. Steps: 1. Enter the TCP/IP Settings (Configuration > Network > Basic Settings > TCP/IP) to set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server. Note: Please refer to Section 6.1.1for detailed information. 2. Enter the Email Settings interface: Configuration > Network >Advanced Settings > Email. 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
Thermal Network Bullet Camera User Manual
67
Anonymous Access to the FTP Server (in which case the user name and
password
won’t be required.):
Check the
Anonymous
checkbox to enable
the anonymous access to the FTP server.
Note:
The anonymous access function must be supported by the FTP
server.
6.
Click
Save
to save the settings.
6.2.3
Configuring Email Settings
Purpose:
The system can be configured to send an Email notification to all designated
receivers if an alarm event is detected, e.g., motion detection event, video loss,
video tampering, etc.
Before you start:
Please configure the DNS Server settings under
Configuration >
Network >
Basic Settings > TCP/IP
before using the Email function.
Steps:
1.
Enter the
TCP/IP Settings (
Configuration >
Network > Basic Settings >
TCP/IP
) to set the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway
and the Preferred DNS Server.
Note:
Please refer to
Section 6.1.1
for detailed information.
2.
Enter the Email Settings interface:
Configuration
>
Network
>
Advanced
Settings
>
Email
.