Hikvision DS-KH8350-WTE1 Configuration Guide - Page 48

Network Indoor Station Configuration Guide Wizard Tap Wizard and set the language, network, indoor station type, device No., and select a device according to the wizard. Refers to Quick Operation (For Normal Device) for the details. Preference Tap Settings → to enter the preference page. Shortcut Settings Enable call elevator, alarm, call management center, or leave message and the icon will be displayed on the home page. Zone Settings Note Only when enable Alarm in the shortcut settings, can the Zone Settings displayed on the Preference page. Set the zone parameters. For details, see Zone Settings . Scene Settings Note Only when enable Alarm in the shortcut settings, can the Scene Settings displayed on the Preference page. Set the scene parameters, including the stay mode, the away mode, the sleeping mode, or customize the scene. For details, see Arming Mode Settings . 3.9 Output Settings You can set and control the connected output devices via the output settings page. You can change the relay' name, and open duration. You can also set to display the relay button on the main page or not. Steps 1. Tap Settings → → Output Settings . Note ● Supports up to 2 relays. ● If no relays displayed on the page, the device may not support the function. 2. Select a relay and set the parameters. Name You can change the relay's name. 39