Hitachi 37LD8800 Owners Guide - Page 13

ENGLISH PREPARATION (continued) Safety Precaution on Main Unit Installation Read SAFETY PRECAUTIONS ( 3 to 6 ) carefully besides this page. *When installing the monitor, use the Desktop Stand (SD8G4237/ optional for 37LD8800TA). Please refer to the user manual of the stand. The Desktop Stand has been used for the illustration in this manual. When installing the main unit, be sure to use the specified mount units in order to obtain maximum performance and maintain the safety. We assume no responsibility or liability for personal injuries or property damages caused by use of other mount units or improper installation. As for the installation instruction, please read each user manual of the mount units: for Desktop Setup, Wall Mounting, and Ceiling Mounting. In case of using Wall or Ceiling Mounting unit, by contacting your local dealer, ask the specified installation specialist to set up. Never attempt to install it by yourself. It could cause injuries or damages. Please leave the adequate space around this monitor in order to avoid increasing the internal temperature and keep safety while using swivel function. Make sure not to block any ventilation holes. Do not install the monitor in the small space such as inside the rack, closet or the box. Leave more than 10cm of clearance from each side of monitor and 30cm from the top of monitor to wall. Without Swivel function: Leave at least 10cm of clearance behind rear monitor. With Swivel function: Leave the adequate space to obtain the maximum performance of Swivel Function. (32LD8800TA:25cm/ 37LD8800TA:29cm) Refer to 36 for Swivel Function. 10cm or more 30cm or more 10cm or more 10cm or more* Cord choarin Clamp Anti-Tumble Measures Install in a stable place and implement safety measure against overturning. Securing on desktop Use two wood screws to secure the set firmly in position by fastening them to the screw holes at the rear of the stand as shown in the diagram. For 32LD8800TA, please get the commercially available wood screws for the stand. For 37LD8800TA, the wood screws are supplied with the optional stand. Wood screw Two places Securing to a wall or pillar Using a commercially available cord, chain, and clamp, secure the set to a wall or pillar. cord or chain hook screw clamp cord or chain Wall or Pillar Securing to ceiling Using a commercially available cord, chain, and clamp, secure the set to a ceiling. NOTE For more information regarding the mounting of the unit, please contact your dealer. Loosen a cord or chain enough while operating power swivel to avoid physical injury. 12