Hitachi 42HDM12 Owners Guide - Page 12
Hookup Cables - plasma monitor
View all Hitachi 42HDM12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English Français HOOKUP CABLES Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable. Phono Connector (Provided) Used on all standard video and audio cables which connect to inputs and outputs located on the rear jack panel. S-Video (Super Video) Connector (Provided) This connector is used on camcorders, VCRs and laserdisc players with an S-Video feature in place of the standard video cable to produce a high quality picture. Stereo Cable This cable is used to connect from external audio out to the audio input of the Plasma monitor (ex. ANALOG RGB/HDMI Audio Input). HDMI Cable This cable is used to connect your external devices such as Set-Top-Boxes or DVD players equipped with an HDMI output connection to the monitor's HDMI input. D-SUB MINI 15-Pin Cable (Provided) This cable is used to connect a computer output to the D-SUB input located on the rear panel of the Plasma monitor. The resolution should be set correctly to display the signal on the Plasma monitor. Subwoofer Cable This cable is used to connect an external audio component input to the subwoofer output of the Plasma monitor. 11