Hitachi 51S715 Owners Guide - Page 63
To Change the Color of Adjustment Point
View all Hitachi 51S715 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SETUP Manual Convergence Adjustment Mode (9 Point Manual Adjustment) NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature. 2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode. 3. If Auto Adjust mode is selected or the Magic Focus button is pressed, all manual adjust mode settings will be erased. Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-9 POINT MANUAL-START to access convergence 9 point pattern. The adjustment point is indicated by the Adjustment Point Cursor. To Move Adjustment Point To move the adjustment point cursor using the CURSOR PAD, the Adjustment Cursor must be WHITE. Another way to move the Adjustment Point Cursor is to press the following buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED. To Change the Color of Adjustment Point Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted. To Adjust the Convergence Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR PAD to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white. Video Audio Aspect Chan. Manager Locks Timers Setup Move SEL Sel Setup Magic Focus Tune Up Menu Preference Set The Inputs Set Virtual HD Set Black Side Panel Set Closed Captions Set Monitor Out About Your TV Move SEL Return ON-SCREEN DISPLAY Setup Magic Focus Tune Up Aligns the Red, Green, and Blue colors to correct for Magnetic Influences. Adjustment Mode Auto 9 Point Manual 117 Point Manual At turn off, (After 90 days). If you want to adjust now Start Move SEL Return Adjustment Point Cursor If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode. Setup Magic Focus Tune Up Manual Adjust Please make a selection from the options below Cancel Done Back Reset Move SEL Select Use the CURSOR PAD to highlight your chosen option. Press the SELECT button to select. Select CANCEL to cancel adjusted data and return to main picture. Select DONE to save your adjustments and return to main picture. Select BACK to return to the manual convergence adjustment mode. Select RESET to recall the factory pre-set convergence data. 63