Hitachi 55EX9K Owners Guide - Page 13

HOOK-UP CABLES AND CONNECTORS HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components. Also make sure the cables are the correct length. 300-Ohm Twin Lead Connector "F" Type 75-Ohm Coaxial This outdoor antenna cable must be connected to Antenna Connector an antenna adaptor (300-Ohm to 75-Ohm). For connecting RF signals (antenna or cable TV) to the antenna jack on the television. Phono Connector S-Video (Super Video) Connector Used on all standard video and audio cables which This connector is used on camcorders, VCRs, connect to inputs and outputs located on the and laser disc players with an S-Video feature Television's front and rear jack panels. in place of the standard video cable to produce a high-quality picture. 13