Hitachi CML174SXW User Manual - Page 19

Technical Information - 17 lcd

Page 19 highlights

ENGLISH Chapter 3 Technical Information Specifications LCD Panel Size Display Type Resolution Display Dot Display Area (mm) Display Color Brightness Contrast Ratio Response Time Lamp Voltage Lamp Current Viewing Angle (CR ≥ 5) ISO 13406-2 Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported Control Power switch (hard and soft types) OSD Brightness Contrast Horizontal Position Vertical Position Phase Clock Display Mode Setup OSD Format 17" (43 cm) Active matrix color TFT LCD 1280 x 1024 1280 x (RGB) x 1024 337.92 x 270.336 (H x V) 16.7M 260 cd/m2 (typical) 400:1 (typical) Ta=25°C Tr=12ms Tf=4ms 700 Vrms (typical) 7.0 mA rms. (typical) Vertical: -80° ~ +80° Horizontal: -80° ~ +80° Pixel fault class: Class II Analog RGB 0.7Vp-p 75 Ohm ±2% Positive 0 - 0.7 ± 0.05 Vp Horizontal Frequency: 24 ~ 80 KHz Vertical Frequency: 56 ~ 75 Hz Digital TMDS ON / OFF switch with LED indicator. Digital Digital Digital Digital Digital Digital Uses EEPROM to save settings in memory 20 characters x 9 rows 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

18
ENGLISH
Chapter 3 Technical Information
Specifications
LCD Panel
Size
17" (43 cm)
Display Type
Active matrix color TFT LCD
Resolution
1280 x 1024
Display Dot
1280 x (RGB) x 1024
Display Area (mm)
337.92 x 270.336 (H x V)
Display Color
16.7M
Brightness
260 cd/m
2
(typical)
Contrast Ratio
400:1 (typical)
Response Time
Ta=25°C Tr=12ms Tf=4ms
Lamp Voltage
700 Vrms (typical)
Lamp Current
7.0 mA rms. (typical)
Viewing Angle (CR
5)
Vertical: -80° ~ +80°
Horizontal: -80° ~ +80°
ISO 13406-2
Pixel fault class: Class II
Video
Input Signal
Input Impedance
Polarity
Amplitude
Multi-mode Supported
Analog RGB 0.7Vp-p
75 Ohm ±2%
Positive
0 - 0.7 ± 0.05 Vp
Horizontal Frequency: 24 ~ 80 KHz
Vertical Frequency: 56 ~ 75 Hz
Digital TMDS
Control
Power switch
(hard and soft types)
ON / OFF switch with LED indicator.
OSD
Brightness
Contrast
Horizontal Position
Vertical Position
Phase
Clock
Display Mode Setup
OSD Format
Digital
Digital
Digital
Digital
Digital
Digital
Uses EEPROM to save settings in memory
20 characters x 9 rows