Hitachi CML190SXWB User Manual - Page 15
Cable Installation, Connecting the Display to your Computer
UPC - 050585658752
View all Hitachi CML190SXWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Cable Installation Please follow these instructions to install the cables. 1. Remove the back panel n from the rear of the monitor.(See Fig. 1.2,1-3) 2. Place the signal cable, the DC power cable into their correct respective grooves. ENGLISH Figure 1-2 Connecting the Display to your Computer 1. Power off your computer. 2. Connect one end of the signal cable to the LCD Monitor's VGA port or DVI port. (See Fig. 1-4) 3. Connect the other end of the signal cable to the VGA port or DVI port on your PC. 4. Make sure both connections are secure. Figure 1-3 Figure 1-4 ATTENTION This device must be connected to an off-the-shelf video cable in order to comply with FCC regulations. A ferrite-loaded interface cable is included in the LCD Monitor package. This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is used. 14