Hitachi CML190SXWB User Manual - Page 20

Technical Information

Page 20 highlights

ENGLISH Chapter 3 Technical Information Specifications LCD Panel Size Display Type Resolution Display Dot Display Area (mm) Display Color Brightness Contrast Ratio Response Time Lamp Voltage Lamp Current Viewing Angle ISO 13406-2 Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported Control Power switch (hard and soft types) OSD Brightness Contrast Horizontal Position Vertical Position Phase Clock Display Mode Setup 19" (48 cm) Active matrix color TFT LCD 1280 x 1024 1280 x (RGB) x 1024 376.32 x 301.056 (H x V) 16.7M 250 cd/m2 (typical) 500:1 (typical) Ta=25°C Tr=15ms Tf=10ms 700 Vrms (typical) 7.0 mA rms. (typical) Vertical: -85° ~ +85° Horizontal: -85° ~ +85° Pixel fault class: Class II Analog RGB 0.7Vp-p 75 Ohm ±2% Positive 0 - 0.7 ± 0.05 Vp Horizontal Frequency: 24 ~ 80 KHz Vertical Frequency: 56 ~ 75 Hz Digital TMDS TMDS 31~80 KHz 60~75 Hz ON / OFF switch with LED indicator. Digital Digital Digital Digital Digital Digital Uses EEPROM to save settings in memory 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

19
ENGLISH
Chapter 3 Technical Information
Specifications
LCD Panel
Size
19" (48 cm)
Display Type
Active matrix color TFT LCD
Resolution
1280 x 1024
Display Dot
1280 x (RGB) x 1024
Display Area (mm)
376.32 x 301.056 (H x V)
Display Color
16.7M
Brightness
250 cd/m
2
(typical)
Contrast Ratio
500:1 (typical)
Response Time
Ta=25°C Tr=15ms Tf=10ms
Lamp Voltage
700 Vrms (typical)
Lamp Current
7.0 mA rms. (typical)
Viewing Angle
Vertical: -85° ~ +85°
Horizontal: -85° ~ +85°
ISO 13406-2
Pixel fault class: Class II
Video
Input Signal
Input Impedance
Polarity
Amplitude
Multi-mode Supported
Analog RGB 0.7Vp-p
75 Ohm ±2%
Positive
0 - 0.7 ± 0.05 Vp
Horizontal Frequency: 24 ~ 80 KHz
Vertical Frequency: 56 ~ 75 Hz
Digital TMDS
TMDS
31~80 KHz
60~75 Hz
Control
Power switch
(hard and soft types)
ON / OFF switch with LED indicator.
OSD
Brightness
Contrast
Horizontal Position
Vertical Position
Phase
Clock
Display Mode Setup
Digital
Digital
Digital
Digital
Digital
Digital
Uses EEPROM to save settings in memory