Hitachi CP-X600 User Manual
Hitachi CP-X600 - XGA LCD Projector Manual
 |
UPC - 050585151208
View all Hitachi CP-X600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP-X600 manual content summary:
- Hitachi CP-X600 | User Manual - Page 1
Projector CP-X600 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read the "User's Manual - Safety Guide" and related manuals in this manual is subject to appear in this manual. • The Video Electronics Standard Association. • Windows - Hitachi CP-X600 | User Manual - Page 2
menu 41 Auto search, Auto keystone , Auto on, Auto off, Lamp time, Filter time, My button, Service, Security Maintenance 52 Lamp 52 Air filter 54 Other care 56 Using the automatic adjustment feature. . .18 Troubleshooting 57 Adjusting the position 19 Related messages 57 Correcting the - Hitachi CP-X600 | User Manual - Page 3
a large projected image from even a short distance. Preparations Contents of package Please see the "Contents of package" in the "User's Manual (concise)" which is a book. Your projector should come with the items shown there. Contact immediately your dealer if anything is missing. NOTE • Keep the - Hitachi CP-X600 | User Manual - Page 4
Lens (56) (7) Lens cover (3) (8) Remote sensors (x 3) (14) (9) Elevator feet (x 2) (9) (10) Elevator knobs (x 2) (9) (11) F ilter cover (54) The air filter and intake vent are inside. (12) Exhaust vents (13) Intake vents (14) Rivet hole (3) (15) Handle (16) Control panel (5) (17) Rear panel - Hitachi CP-X600 | User Manual - Page 5
AUDIO IN 1 AUDIO IN 2 RGB OUT Y VIDEO RGB1 CB/PB RGB2 CR/PR S-VIDEO R L AUDIO IN 3 R L AUDIO IN 4 AUDIO OUT I O AC IN CONTROL (9) (10) (14) (15) (11) (5) (4) (3) CAUTION ►Do not use the security bar and the security slot to prevent the projector from falling down, since it is not - Hitachi CP-X600 | User Manual - Page 6
Part names Remote control (1) VIDEO button (17) (2) RGB button (16) (3) SEARCH button (17) (4) STANDBY/ON button (15) (5) ) (10) (11) (inactive) (15) (14) (17) (19) (21) Back of the remote control (22) WARNING ►Do not look into the beam outlet and point the beam at people and pets while - Hitachi CP-X600 | User Manual - Page 7
humid or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. - Hitachi CP-X600 | User Manual - Page 8
(b) (a) (c) up (c) down Suspended from the ceiling (c) up (a) (c) down (b) • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installation such as suspending from a ceiling. (a) Screen size [inch - Hitachi CP-X600 | User Manual - Page 9
CONTROL a suitable angle to the screen, projector within 8 degrees. elevating the front side oAfCthINe q This projector locked, put the projector gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet - Hitachi CP-X600 | User Manual - Page 10
other abnormalities that may result in malfunction or damage to the device and the projector. ►Use appropriate accessory or otherwise designed cables. Ask your dealer about non-accessory cables which may have to be of a specific length or equipped with a core. For cables with a core only at one end - Hitachi CP-X600 | User Manual - Page 11
with screws. • When connecting a laptop PC to the projector, be sure to activate the PC's external RGB output. (Set the laptop PC to CRT display or to simultaneous LCD and CRT display.) For details on how this is done, please refer to the instruction manual of the corresponding laptop PC. • When the - Hitachi CP-X600 | User Manual - Page 12
Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. AC in fire and/or electrical shock. • Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. • Only plug - Hitachi CP-X600 | User Manual - Page 13
in the direction of the arrow. 2. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery cover in the direction of the arrow and snap it back into place. WARNING ►Always handle the batteries with care and use - Hitachi CP-X600 | User Manual - Page 14
range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights. 20º 20º Approx. 3 m Changing the frequency of remote control signal The accessory remote control has the two choices on signal frequency Mode - Hitachi CP-X600 | User Manual - Page 15
position. The power indicator will light up in steady orange (58). VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END Press the STANDBY/ON button on the projector or the remote control again while the message appears. The projector lamp will go off, and the POWER - Hitachi CP-X600 | User Manual - Page 16
an input signal 1. Press the INPUT button on the projector. Each time you press the button, the projector switches its input port as below. RGB 1 RGB 2 VIDEO S-VIDEO COMPONENT (Y, CB/RB, CR/BR) 1. Press the RGB button on the remote control to select an input port for the RGB signal. Each - Hitachi CP-X600 | User Manual - Page 17
other ports in above ordEeNTErR. Searching an input signal ESC RESET 1. Press the SEARCH button on the remote control. The projector will start to check its input ports in order to VIDEO RGB SEARCH ASPECT AUTO BLANK find any input signals. MAGNIFY ON HOME PAGE UP VOLUME When an input - Hitachi CP-X600 | User Manual - Page 18
Top Focus ring Using the automatic adjustment feature 1. Press the AUTO button on the remote control. For an RGB signal The vertical position, the horizontal position, the horizontal VIDEO RGB SEARCH ASPECT AUTO BLANK phase and the horizontal size will be automatically adjusted. MAGNIFY - Hitachi CP-X600 | User Manual - Page 19
VIDEO RGB SEARCH Correcting the keystone distortions ASPECT AUTO BLANK 1. Press the KEYSTONE button on the remote control automatic vertical keystone correction. 2) Manual displays a dialog for keystone item in the SETUP menu, if the projector screen is inclined or angled downward, this - Hitachi CP-X600 | User Manual - Page 20
when one of the projector's buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, MUTE, KEYSTONE, POSITION, MENU, MAGNIFY and MY BUTTON is pressed. ● If the projector continues projecting a still image for a long time, the LCD panel might possibly be - Hitachi CP-X600 | User Manual - Page 21
remote control. The blank screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in SCREEN menu (37). VIDEO 1 2 ● The projector automatically returns to the input signal screen when one of the projector's buttons or the remote control buttons is pressed or - Hitachi CP-X600 | User Manual - Page 22
ESC ENTER RESET VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC ENTER RESET 1. Press the MENU button on the remote control or one of the cursor buttons on the projector. The Advanced MENU - Hitachi CP-X600 | User Manual - Page 23
MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control. Then perform it according to the following table. EASY Menu '#5;/'07=4)$? #52'%6 #-7'6;156-1'0;'5610' -';5610' ':'%76' 2+%674'/1&' $4+)*60'55 - Hitachi CP-X600 | User Manual - Page 24
. A dialog is displayed for confirmation. Selecting the RESET using the ▲ button performs resetting. Performing this item resets the filter time which counts usage time of the air filter. A dialog is displayed for confirmation. Selecting the RESET using the ▲ button performs resetting. See the - Hitachi CP-X600 | User Manual - Page 25
item using the ▲/▼ cursor buttons on the +0276 5'672 7.6 %1.146'/2/+& projector or remote control, and press the ► cursor button #7&+1 5%4''0 %1.14 6+06 on the projector or remote control, or the ENTER button 126+10 5*#420'55 '#5;/'07 #%6+8'+4+56740 - Hitachi CP-X600 | User Manual - Page 26
other distortion may appear. COLOR Using the ▲/▼ buttons adjusts the strength of whole color. Strong ó Weak • This item can be selected only for a video signal, s-video or component video signal. TINT Using the ▲/▼ buttons adjusts the tint. Greenish ó Reddish • This item can be selected only for - Hitachi CP-X600 | User Manual - Page 27
Description Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION ó THEATER ó TURN OFF ACTIVE IRIS MY the PRESENTATION or THEATER modes are selected. If this occurs select TURN OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). - Hitachi CP-X600 | User Manual - Page 28
on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to default setting. • When this function is performed on a video signal, s-video signal, or component video signal of 525i (480i) or 625i (576i), the range - Hitachi CP-X600 | User Manual - Page 29
by pressing the RESET button on the remote control during this operation. Selecting this item be automatically selected. Make sure that the application window is set to its maximum size prior to attempting when adjusting. For a Video signal or S-video signal The video format best suited for the - Hitachi CP-X600 | User Manual - Page 30
the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to This function is performed only for an interlaced signal of a VIDEO input, an S-VIDEO input or COMPONENT VIDEO input of 525i (480i), 625i (576i) or 1125i (1080i - Hitachi CP-X600 | User Manual - Page 31
to the projector. For details, contact your dealer. RGB OUT RGB1 RGB2 M1-D AUDIO IN 1 AUDIO IN 2 VIDEO Y CB/PB CR/PR REMOTE S-VIDEO R L R AUDIO L OUT CONTROL CO AUDIO IN 3 AUDIO IN 4 Video G B R SCART OUT VIDEO FORMAT Set the video format for the s-video port and video port - Hitachi CP-X600 | User Manual - Page 32
INPUT Menu INPUT Menu (continued) Item FRAME LOCK RGB IN Description Using the ▲/▼ buttons turns the frame lock function on/off. TURN ON ó TURN OFF • This item can be performed only on an RGB signal with a vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving pictures are - Hitachi CP-X600 | User Manual - Page 33
INPUT Menu (continued) INPUT Menu Item RESOLUTION Description The resolution for the RGB1 and RGB2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. 4'51.76+10 (2) - Hitachi CP-X600 | User Manual - Page 34
the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it according to the following table. /'07 - Hitachi CP-X600 | User Manual - Page 35
. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (50) will be displayed when projector is restarted after the power switch is turned off. 35 - Hitachi CP-X600 | User Manual - Page 36
buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute a picture input port using the ▲/▼ buttons. RGB1 ó RGB2 VIDEO ó S-VIDEO ó COMPONENT #7&+1 37+6 4)$ 4)$ %1/210'06 58+&'1 - Hitachi CP-X600 | User Manual - Page 37
in the table below can be performed. Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. /'07 - Hitachi CP-X600 | User Manual - Page 38
SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen - Hitachi CP-X600 | User Manual - Page 39
image is displayed. The image will freeze and the frame for capturing will appear. To stop performing, press the RESET or ESC button on the remote control. 2. Using the buttons adjusts the frame position. Please move the frame to the position of the image which you want to use. The frame - Hitachi CP-X600 | User Manual - Page 40
. • When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (20). Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME - Hitachi CP-X600 | User Manual - Page 41
projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item, except for the items LAMP TIME and FILTER the projector will stop searching and display the image. RGB 1 RGB 2 COMPONENT S-VIDEO VIDEO - Hitachi CP-X600 | User Manual - Page 42
about the lamp. • For the lamp replacement, see the section "Lamp" (52, 53). The filter time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the air filter. Pressing the RESET button on the remote control or the ► button of the projector displays - Hitachi CP-X600 | User Manual - Page 43
COMPONENT (Y, Cb/Pb, Cr/Pr). • S-VIDEO: Sets port to S-VIDEO. • VIDEO: Sets port to VIDEO. • INFORMATION: Displays a dialog of INPUT remote control to execute the item. FAN SPEED AUTO ADJUST GHOST FILTER MESSAGE KEY LOCK SERVICE FACTORY RESET INFORMATION REMOTE FREQ. REMOTE - Hitachi CP-X600 | User Manual - Page 44
will rise, which could cause malfunction, or reduce the lifetime of the projector. • It is recommended to choose "100h" in general. Please be careful with the operating environment of the projector and the condition of the air filter, especially when the "200h", "300h" or "TURN OFF" is chosen - Hitachi CP-X600 | User Manual - Page 45
projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control. REMOTE RECEIV. (1) Select a remote COMPONENT VIDEO port LAMP TIME, FILTER TIME, LANGUAGE and SECURITY are not - Hitachi CP-X600 | User Manual - Page 46
continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the PASSWORD during this time. Pressing the ENTER button on the remote controll or INPUT button on the projector will close the NOTE NEW PASSWORD BOX. • Please do - Hitachi CP-X600 | User Manual - Page 47
and hold the RESET button on the remote control for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds. The 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. SECURITY 2. Using the MyScreen PASSWORD - Hitachi CP-X600 | User Manual - Page 48
during this time. Pressing the ENTER button on the remote control or INPUT button on the projector will return to '06'4 ':+6 PASSWORD BOX MyScreen your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being - Hitachi CP-X600 | User Manual - Page 49
the projector is restarted after Code. The projector can be projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector function will activate only when the projector is started after the power Code is displayed the projector will turn off. - Hitachi CP-X600 | User Manual - Page 50
is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch during this time. Pressing the ENTER button on the remote control or the INPUT button on the projector will return to the CHECK PASSWORD BOX 64#05+6+10 - Hitachi CP-X600 | User Manual - Page 51
Code will be displayed inside the BOX. 4.4-3 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 64#05+6+10&'6'%614 '06'42#55914& +PSWKTKPI%QFG 37+6 0':6 ENTER PASSWORD BOX (large) 51 - Hitachi CP-X600 | User Manual - Page 52
out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number = DT00771 Replacing the lamp The lamp cover 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi CP-X600 | User Manual - Page 53
. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. To replace the lamp, make sure that the screws are tightened firmly. Loose screws could result in damage or - Hitachi CP-X600 | User Manual - Page 54
Replace the air filter with new one. It is recommended that the fluted surface of the air filter faces the filter cover. 7. Put the filter frame back. 8. Put the filter unit back into the projector. The front side of the projector The filter cover The filter cover knobs The filter unit The filter - Hitachi CP-X600 | User Manual - Page 55
also when you replace the lamp. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable - Hitachi CP-X600 | User Manual - Page 56
not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the - Hitachi CP-X600 | User Manual - Page 57
the SERVICE item in the OPTION menu to HIGH. REMINDER A note of precaution when cleaning the air filter. *** HRS PASSED AFTER THE Please immediately turn the power off, and clean or change LAST FILTER CHECK. the air filter referring to the "Air Filter" section of this manual FILTER MAINTENANCE - Hitachi CP-X600 | User Manual - Page 58
the instructions within the table. If the same indication is displayed after the remedy, or if an indication other than the following is displayed, please contact your dealer or service company. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is - Hitachi CP-X600 | User Manual - Page 59
to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again. • Is there blockage of the air passage aperture? • Is the air filter dirty? • Does the peripheral temperature exceed 35°C? If the - Hitachi CP-X600 | User Manual - Page 60
again, wait at least 10 minutes to make the projector cool down enough. 3. Some setting may be wrong. Please use the FACTORY RESET function of the SERVICE item in the OPTION menu (45) to reset all settings to factory default. Then, if the problem is not removed after the remedy, please contact your - Hitachi CP-X600 | User Manual - Page 61
Troubleshooting Phenomena that may be easy to be mistaken for projector as a plug and play monitor. Make sure that the computer can detect a plug and play monitor using another plug and play monitor. 24, 25 11 The BLANK screen is displayed. Press the BLANK button on the remote control. 21 Video - Hitachi CP-X600 | User Manual - Page 62
Troubleshooting Phenomena item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal front is blocked by some objects. Remove any objects from front side of the projector. Reference page 24, 25 24, 35 52, 53 18, 29 56 4 - Hitachi CP-X600 | User Manual - Page 63
VIDEO Video x1 Audio input port AUDIO IN1........Stereo mini x1 AUDIO IN2........Stereo mini x1 AUDIO IN3 RCA x2 AUDIO IN4 RCA x2 Communication port CONTROL.......... D-sub 9pin x1 Optional parts Lamp Air filter Others DT00771 MU03642 * Please consult your dealer. NOTE • These specifications - Hitachi CP-X600 | User Manual - Page 64
319 Specifications Specifications (continued) 418 [unit: mm] 64 154 139
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
 |
 |
±
Projector
CP-X600
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING
►
Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted
without express written consent.
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.