Hitachi CP-X600 User Manual - Page 17

Operating Selecting an input signal (continued) 1. Press the VIDEO button on the remote control to select an input for video signal. Each time you press the button, the projector switches its video input port as below. COMPONENT (Y, CB/RB, CR/BR)  S-VIDEO  VIDEO VIDEO RGB SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE ● If the VIDEO button is pushed (when switching from RGB to VIDEO sig1nal2s) when TURN ON is selected for the AUTO SEARCH item in the OPTION menu the projector will check the COMPONENT (Y, CB/RB, CR/BR) port first. If POSITION no inpMEuNU t is detected at the port, the projector will check other ports in above ordEeNTErR. Searching an input signal ESC RESET 1. Press the SEARCH button on the remote control. The projector will start to check its input ports in order to VIDEO RGB SEARCH ASPECT AUTO BLANK find any input signals. MAGNIFY ON HOME PAGE UP VOLUME When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the OFF END PAGE DOWN MUTE operation. FREEZE MY BUTTON KEYSTONE 1 2 RGB 1  RGB 2  COMPONENT (Y, CB/RB, CR/BR)  S-VIDEO  VIDEO POSITION MENU ENTER Selecting an aspect ratio ESC RESET 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.  For an RGB signal NORMAL  4:3  16:9  SMALL VIDEO RGB SEARCH  For a video signal, s-video signal or component video signal 4:3  16:9  14:9  SMALL ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE  For no signal FREEZE MY BUTTON KEYSTONE 1 2 4:3 (fixed) POSITION MENU ● The NORMAL mode keeps the original aspect ratio of the signal. ENTER ● Performing the automatic adjustment initializes the aspect ratio setting. ESC RESET 17