Hitachi CPX400 User Manual - Page 17

Operating Selecting an input signal (continued) VIDEO 1. Press VIDEO button on the remote control. Each time you press the button, the projector switches its input port as below. COMPONENT(Y, Cb/Pb, Cr/Pr)  S-VIDEO  VIDEO VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE ● If VIDEO button is pushed to switch from a signal from FREEZE MY BUTTON KEYSTONE 1 2 COMPUTER IN1 or 2 port, when TURN ON is selected for AUTO POSITION MENU SEARCH item in OPTION menu (40), the projector will check ENTER COMPONENT port first. If no input is detected at the port, the projector will ESC RESET check the other port in above order.   Searching an input signal 1. Press SEARCH button on the remote control. The projector will start to check its input ports in order to find any input signals. When an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation. COMPUTER IN 1  COMPUTER IN 2 VIDEO S-VIDEO COMPONENT (Y, Cb/Pb, Cr/Pr) Selecting an aspect ratio 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.  For a computer signal NORMAL  4:3  16:9  SMALL  For a video signal, s-video signal or component video signal 4:3  16:9  14:9  SMALL  For no signal 4:3 (fixed) ● ASPECT button does not work when no proper signal is inputted. ● NORMAL mode keeps the original aspect ratio setting. SEARCH VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC ENTER RESET ASPECT VIDEO COMPUTER SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC ENTER RESET 17