Hitachi CPX400 User Manual - Page 19

Operating Using the automatic adjustment feature 1. Press AUTO button on the remote control. Pressing this button performs the following. AUTO  For a computer signal VIDEO COMPUTER SEARCH The vertical position, the horizontal position and the horizontal phase will be automatically adjusted. And the horizontal size ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME will be automatically set to the default. OFF END PAGE DOWN MUTE Make sure that the application window is set to its maximum FREEZE MY BUTTON KEYSTONE 1 2 size prior to attempting to use this feature. A dark picture may POSITION MENU still be incorrectly adjusted. Use a bright picture when adjusting. ENTER  For a video signal, s-video signal or component video signal ESC RESET The video format best suited for the respective input signal will be selected automatically. This function is available only when AUTO is selected for VIDEO FORMAT item in INPUT menu (32). The vertical position and horizontal position will be automatically set to the default. For a component video signal, also the horizontal phase will be automatically set to the default. ● The automatic adjustment operation requires several seconds. Also please note that it may not function correctly with some input. When this function is performed for a video signal, a certain extra such as a line may appear outside a picture. ● The items adjusted by this function may vary when FINE or DISABLE is selected for AUTO ADJUST item of SERVICE item in OPTION menu (43). VIDEO COMPUTER SEARCH ASPECT AUTO BLANK Adjusting the position MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE 1. Press POSITION button on the remote control when no menu is indicated. The "POSITION" indication will appear on the screen. 2. Use the cursor buttons to adjust the picture position. When you want to reset the operation, press RESET button on the remote control during the operation. To complete this operation, press POSITION button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds. FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC ENTER RESET POSITION ● When this function is performed on a video signal, s-video signal or component video signal, some image such as an extra-line may appear at outside of the picture. ● When this function is performed on a video signal, s-video signal or component video signal, the range of this adjustment depends on OVER SCAN in IMAGE menu (29) setting. It is not possible to adjust when OVER SCAN is set to 10. ● If POSITION button is pressed when a menu is indicated on screen, the displayed picture does not move its position but the menu does. 19