Hitachi DH40MRY Instruction Manual - Page 4

English b) Use safety equipment. Always wear eye Many accidents are caused by poorly protection. maintained power tools. Safety equipment such as dust mask, non- f) Keep cutting tools sharp and clean. skid safety shoes, hard hat, or hearing Properly maintained cutting tools with sharp protection used for appropriate conditions cutting edges are less likely to bind and are will reduce personal injuries. easier to control. c) Avoid accidental starting. Ensure the switch g) Use the power tool, accessories and tool bits is in the off position before plugging in. etc., in accordance with these instructions Carrying power tools with your finger on the and in the manner intended for the particular switch or plugging in power tools that have type of power tool, taking into account the the switch on invites accidents. working conditions and the work to be d) Remove any adjusting key or wrench before performed. turning the power tool on. Use of the power tool for operations different A wrench or a key left attached to a rotating from intended could result in a hazardous part of the power tool may result in personal situation. injury. 5) Service e) Do not overreach. Keep proper footing and a) Have your power tool serviced by a qualified balance at all times. repair person using only identical This enables better control of the power tool replacement parts. in unexpected situations. This will ensure that the safety of the power f) Dress properly. Do not wear loose clothing tool is maintained. or jewellery. Keep your hair, clothing and gloves away from moving parts. -WARNING- Loose clothes, jewellery or long hair can be To reduce the risk of injury, user must read caught in moving parts. instruction manual. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly SPECIFIC SAFETY RULES AND SYMBOLS used. 1. Hold tools by insulated gripping surfaces when Use of these devices can reduce dust-related performing an operation where the cutting tool hazards. may contact hidden wiring or its own cord. Contact 4) Power tool use and care with a "live" wire will make exposed metal parts a) Do not force the power tool. Use the correct of the tool "live" and shock the operator. power tool for your application. 2. ALWAYS wear ear protectors when using the tool The correct power tool will do the job better for extended periods. and safer at the rate for which it was designed. Prolonged exposure to high intensity b) Do not use the power tool if the switch does noise can cause hearing loss. not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power toll before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired 3. NEVER touch the tool bit with bare hands after operation. 4. NEVER wear gloves made from materials likely to roll up such as cotton, wool, cloth or string, etc. 5. ALWAYS attach the side handle and securely grip the Rotary Hammer. 6. NEVER touch moving parts. NEVER place your hands, fingers or other body parts near the tool's moving parts. 7. NEVER operate without all guards in place. NEVER operate this tool without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety feature, be sure to replace the guard or safety feature before resuming operation of the tool. before use. 4