Hitachi DV18DCL Handling Instructions - Page 11
Guarantee - parts
UPC - 717709013025
View all Hitachi DV18DCL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
GUARANTEE We guarantee Hitachi Power Tools in accordance with statutory/country specific regulation. This guarantee does not cover defects or damage due to misuse, abuse, or normal wear and tear. In case of complaint, please send the Power Tool, undismantled, with the GUARANTEE CERTIFICATE found at the end of this Handling instruction, to a Hitachi Authorized Service Center. NOTE Due to HITACHI's continuing program of research and development, the specifications herein are subject to change without prior notice. Information concerning airborne noise and vibration The measured values were determined according to EN60745 and declared in accordance with ISO 4871. Measured A-weighted sound power level: 96 dB (A) Measured A-weighted sound pressure level: 85 dB (A) Uncertainty KpA: 3 dB (A). Wear hearing protection. Vibration total values (triax vector sum) determined according to EN60745. a Impact drilling into concrete: Vibration emission value h, ID = 13.5 m/s2 Uncertainty K = 2.4 m/s2 a Drilling into metal: Vibration emission value h, D = 2.4 m/s2 Uncertainty K = 1.5 m/s2 The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another. It may also be used in a preliminary assessment of exposure. WARNING ◯ The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used. ◯ Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 11