Hitachi G18DL Instruction Manual - Page 15
Depressed Center Wheel Assembly - grinder parts
UPC - 717709011717
View all Hitachi G18DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY WARNING: Be sure to turned off the switch and pull out the battery. 1. Assembly (1) Turn the disc grinder upsidedown so that the spindle is facing upward. (2) Align the oval-shaped indentation of the wheel washer with the notched part of the spindle, then attach them. (3) Fit the protuberance of the depressed center wheel onto the wheel washer. (4) Screw the wheel nut onto the spindle. (5) While pushing the push button with one hand, lock the spindle by turning the depressed center wheel slowly with the other hand. Tighten the wheel nut by using the supplied wrench as shown in Fig. 8. Wrench Tighten Wheel nut Depressed center wheel Wheel washer Spindle Wheel guard Fig. 8 Push button CAUTION: Tighten the wheel nut securely and confirm that the depressed center wheel does not wobble. 2. Disassembly To remove the depressed center wheel, simply reverse the above-mentioned procedure. English 15