Hitachi HTS722020K9SA00 Specifications - Page 134
Software Settings Preservation
![]() |
UPC - 890552607150
View all Hitachi HTS722020K9SA00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Note 1. 7K200 SATA OEM Specification When Feature register is 03h (=Set Transfer mode), the Sector Count Register specifies the transfer mechanism. The upper 5 bits define the type of transfer and the low order 3 bits encode the mode value. PIO Default Transfer Mode bits bits (7:3) (2:0) 00000 000 PIO Default Transfer Mode, Disable IORDY 00000 001 PIO Flow Control Transfer Mode x 00001 nnn (nnn=000,001,010,011,100) Multiword DMA mode x 00100 nnn (nnn=000,001,010) Ultra DMA mode x 01000 nnn (nnn=000,001,010,011,100,101) When Feature register is 05h (=Enable Advanced Power Management), the Sector Count Register specifies the Advanced Power Management level. C0h - FEh ... The deepest Power Saving mode is Active Idle 80h - BFh ... The deepest Power Saving mode is Low power Idle 01h - 7Fh ... The deepest Power Saving mode is Standby 00h, FFh ... Aborted Note 2. If the number of auto reassigned sectors reaches the device's reassignment capacity, the write cache function will be automatically disabled. Although the device still accepts the Set Features command (with Feature register = 02h) without error, the write cache function will remain disabled. For current write cache function status, please refer to the Identify Device Information(129word) by Identify Device command. Power off must not be done in 5 seconds after write command completion when write cache is enabled. Note 3. When Feature register is 85h (=Disable Advanced Power Management), the deepest Power Saving mode becomes Active Idle. Note 4. When the Feature register is set to 10h or 90h, the value set to the Sector Count register specifies the specific Serial ATA feature to enable or disable. When the Feature register is set to 10h or 90h, the value set to the Sector Count register specifies the specific Serial ATA feature to enable or disable. Sector count value Description 01h Non-zero buffer offset in DMA setup FIS 02h DMA setup FIS auto-activate optimization 03h Device-initiated interface power state transitions 04h Guaranteed in-order data delivery 06h Software Settings Preservation 134/173
![](/manual_guide/products/hitachi-hts722020k9sa00-specifications-bda18ae/134.png)