Hitachi L19D103 Owners Guide - Page 29

ENGLISH 3 Press ▲ or ▼ to select your desired screen type, then press ENTER. Language Video Audio TV Screen 4:3 Display Picture Mode 4:3 16:9 JPEG Interval : Off Locks You have the following screen sizes to choose from: 4:3 Letterbox When playing back a wide screen DVD disc, it displays the wide picture with black bands at the top and bottom of screen. 4:3 Panscan It displays the wide picture on the whole screen with left and right edges automatically cut off. 16:9 Wide A wide screen picture is displayed full size. 4 Press SETUP/TV MENU to remove the menu screen. NOTE: • It is not always possible for the DVD disc to display the picture as per your preferred picture setting - for example, if you select "4:3 Panscan", the disc may not offer this option. In this case the picture would display the format the disc is capable of playing back. Setting on screen display On screen display can be switched on or off. 1 Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select "Video", then press ▶ or ENTER. 2 Press ▲ or ▼ to select "Display", then press ▶ or ENTER. 3 Press ▲ or ▼ to select "On" or "Off", then press ENTER. Language Video Audio TV Screen : 16:9 Display Off Picture Mode On JPEG Interval : Off Locks Language Video Audio TV Screen : 16:9 Display Picture Mode JPEG Interval : On Auto Film Video Locks Auto: Select this position normally. The DVD player automatically detects source content, film or video, of playback source. Film: Suitable for playback of film content pictures. Video: Suitable for playback of video content pictures. 4 Press SETUP/TV MENU to remove the menu screen. NOTE: • Depending on the disc, pictures may be cut off or doubled. In this case, select "Video". Night mode Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment. 1 Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select "Audio", then press ▶ or ENTER. 2 Press ▲ or ▼ to select "Night Mode", then press ▶ or ENTER. 3 Press ▲ or ▼ to select "On" or "Off", then press ENTER. On : Loud sounds such as explosions are toned down slightly when played. Off : The unit will play the disc as recorded. Night Mode Off Language Digital Out On Video Audio Locks 4 Press SETUP/TV MENU to remove the menu screen. On: On screen displays appear when you press the buttons (factory setting). Off: On screen displays do not appear when you press any buttons except SUBTITLE, PLAY MODE, MARKER, DISPLAY, AUDIO and JUMP. 4 Press SETUP/TV MENU to remove the menu screen. Setting the picture mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. 1 Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select "Video", then press ▶ or ENTER. 2 Press ▲ or ▼ to select "Picture Mode", then press ▶ or ENTER. 3 Press ▲ or ▼ to select your desired picture mode, then press ENTER. Digital out You can select the digital output sound format corresponding to your system connection. 1 Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select "Audio", then press ▶ or ENTER. 2 Press ▲ or ▼ to select "Digital Out", then press ▶ or ENTER. 3 Press ▲ or ▼ to select "Off", "PCM" or "Bitstream", then press ENTER. Language Video Audio Night Mode Digital Out : Off Off PCM Bitstream Locks 29