Hitachi L32A404 Owners Guide - Page 9

FIRST TIME USE Side Panel Jacks & Controls 8 4 FRONT VIEW 3 5 7 10 2 6 3 11 1 9 POWER Button This button is for turning ON the LCD TV, in order to turn the TV On, the standby indicator must be lit red. If the indicator is off, plug the power cord into the AC outlet. MENU Button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote control. This button also serves as the Return button when in the MENU system. INPUT Button Press this button to access the INPUT menu. VOLUME (+/-) Level Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the CURSOR left (◄) and right (►) buttons when in the Menu system. CHANNEL Selector Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the CURSOR down ( ) and up ( ) buttons when in the MENU system. COMPOSITE AV2 Jacks AV2 input provide composite Video jack for connecting device with this capability, such as a DVD player, Game Console or Camcorders. HDMI 3 & HDMI 4 Use these side HDMI inputs for AV device such as set top boxes or DVD players equipped with an HDMI output connection (see page 14 for reference). USB SERVICE Slot This USB slot is for future software upgrades. HEADPHONE Jack Use this jack to connect headphones. POWER LIGHT Indicator To turn the TV ON, press the POWER button ( ). A blue indicator lamp located on the lower left corner of the front bezel illuminates to indicate the TV power is ON. Indicating Lamp Power Status Operating Lights Red OFF When the LCD TV is plugged (Stand-by) to the AC outlet. Lights Blue ON TV Power is ON; picture is shown. Quickly Blinking Red ON The TV is powering OFF. It will soon be in the Off (Stand-by) state. 1 REMOTE CONTROL Sensor Point your remote control at this area when selecting channels, adjusting volume, etc. NOTES • Your HITACHI LCD TV will not show any picture if there is no video input when AV1, AV2, Component1 or 2, or HDMI 1, 2, 3 or 4 is selected. Instead, a message will indicate "No Signal", and the Power Light will remain Blue until the TV is turned off or in Stand-by mode (lights red) when not in use. • The remote control can turn the TV ON/OFF as well as control various devices and any compatible HDMI CEC devices. • Please do not put anything around the remote control sensor. 9