Hitachi M12SA2 Instruction Manual - Page 8
Save These Instructions, Make Them Available To, Other Users, Owners Of This Tool
UPC - 717709010383
View all Hitachi M12SA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English USE OF EXTENSION CORD Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. Ampere Rating More Not More Than Than 0 - 6 6 - 10 10 - 12 12 - 16 MINIMUM GAGE FOR CORD SETS Total Length of Cord in Feet (Meter) 0 - 25 26 - 50 51 - 100 (0 - 7.6) (7.9 - 15.2) (15.5 - 30.5) AWG 101 - 150 (30.8 - 45.7) 18 16 16 14 18 16 14 12 16 16 14 12 14 12 Not Recommended WARNING: Avoid electrical shock hazard. Never use this tool with a damaged or frayed electrical cord or extension cord. Inspect all electrical cords regularly. Never use in or near water or in any environment where electric shock is possible. SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE TO OTHER USERS AND OWNERS OF THIS TOOL! 8