Hitachi P50H401 Owners Guide - Page 54

Setup Set The Quick Start Options This feature will select QUICK START UP options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the QUICK START UP feature will activate the TV tuners circuits when the TV is in "standby mode" which is commonly referred to as "off". This will allow you to quickly tune to channels when first turning the TV on. Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected. NOTE: 1. When setting the Quick Start option to ON the option of Reset TV Settings will not operate unless you turn ON/OFF the main power button. Setup Setup The Menu Options Set The Screen Saver Set The Inputs Set The Closed Captions Set The Quick Start Options Reset The Software Move SEL Select Setup Set The Quick Start Options Select ON to have the TV tune channels quickly at 1st turn on. Select OFF to save electricity Off On Move SEL Select On-Screen Display Reset The Software This feature shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC/SD CARD). If a future software upgrade is required for your TV, HITACHI will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card. 1. Insert MMC/SD CARD. 2. Press the CURSOR PAD ̆ or ̄ to highlight UPGRADE NOW. 3. Press the SELECT button to select and start upgrading. 4. Unplug the AC power cord when the UPGRADE is complete. NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade procedure. Setup Setup The Menu Options Set The Screen Saver Set The Inputs Set The Closed Captions Set The Quick Start Options Reset The Software Move SEL Select Setup Reset The Software OR MMC Software Upgrade : Vxxxx.xxxx Upgrade Now Please Insert MMC card before upgrading. Reset TV Settings No Yes (Select "Yes" to return all settings to the factory default after main power OFF/ON.) Move SEL Return Reset TV Settings This function allows you to Reset all TV Settings to the original factory settings on all modes during the next power off/on. 1. Use CURSOR PAD ̆, ̄ to highlight functions. 2. Press the SELECT button or CURSOR PAD ̈ to select Reset the Software Menu. 3. Use the CURSOR PAD ̄ to access the Reset TV settings option. 4. Select the "YES" option to Reset ALL the TV functions during the next main power on/off. NOTE: 1. If YES is selected, ALL TV MENU SETTINGS will be reset to the original factory settings on all modes during the next power off/on . 2. When the Quick Start option has been set to ON , this option needs POWER OFF/ON operation by the Main Power SW. 54