Hitachi SV13YA Instruction Manual - Page 13
How To Install The Optional Accessories, Warning - pad
UPC - 717709009295
View all Hitachi SV13YA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3. Switching the sander ON and OFF The power can be turned on by setting the lever to ON (1) and turned off by setting the lever to OFF (0). English Fig. 8 NOTE: Never turn the power switch ON when the sander is contacting the surface to be sanded. This is necessary to preclude damage to the material. The same applies when switching the power OFF. CAUTION: ⅷ lmmediately after use, always turn the sander off and unplug it. ⅷ Since the sander may suck in dust and debris, be careful not to place it where there is much dust and debris when it is still spinning right after use. HOW TO INSTALL THE OPTIONAL ACCESSORIES WARNING: Be sure to switch power OFF and disconnect the plug to avoid accidents. ⅜ Mounting the polyester buff Since the attachment is a hook-and-loop type as with the sanding paper, the polyester buff can be mounted by just pressing it onto the pad (Fig. 9). Polyester buff Fig. 9 13