Hitachi T-17SXL User Guide - Page 22

StarBoard T-17SXL Usage 2. Usage Procedures This section describes the basic procedures for using StarBoard. For information on using advanced StarBoard features, see the StarBoard Software x.x. User's Guide. 2.1 Turning the StarBoard On This section describes how to turn the StarBoard on. (1) Turn on the StarBoard power. Push the power button (2) Turn on the PC and allow Windows to start. (3) The StarBoard Software starts automatically. (If the Startup checkbox was not checked during the shortcut creation process when the software was installed, the StarBoard Software will not start when Windows opens. In such cases, start the StarBoard Software manually. For further details, see the StarBoard Software x.x User's Guide.) Manual Startup Either select Start → Programs → StarBoard Software → StarBoard Software, or double-click the StarBoard Software icon on the desktop. (The StarBoard Software icon is not created on the desktop unless the Desktop checkbox is selected during the shortcut creation process when the software is installed.) Notice when displaying screens at SXGA resolution Be sure to set the monitor refresh rate to 60 Hz if displaying the StarBoard at SXGA resolution (1280×1024). If used at a refresh rate other than 60 Hz, the pen may not operate correctly due to noise from the LCD panel. (For details on how to make settings, see your PC's manual and other documentation.) 2-1 English