Hitachi VM-6400A Owners Guide - Page 28
STABLE PIX Electronic Image Stabilizer FUNCTION Only for VIVI, 7400A, INDEX SIGNAL RECORDING
View all Hitachi VM-6400A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
FADE IN/FADE OUT (Only for VM-7400A) - 28 - NOTE: When fading out be sure to wait until the PAUSE indicator (11) is visible in the viewfinder before attempting to put the camcorder into the record mode again. "STABLE PIX" (Electronic Image Stabilizer) FUNCTION (Only for VIVI7400A) The stable pix function corrects slight shaking of the image being recorded and is effective in the following situations. • While you zoom to a distant subject. • While you approach a small subject. • While you walk around. • While you record from inside a moving vehicle. 1. Press "STABLE PIX" . When "DISPLAY" is pressed, the display will appear in the viewfinder, along with STABLE PIX icon " " . 2. Press "REC/PAUSE" to start recording. When STABLE PIX is engaged the viewfinder image shakes with a slight delay. NOTES: • STABLE PIX may not function if you use a wide or tele converter lens. • When the STABLE PIX function is engaged in the vicinity of the zoom range with "ZOOM" displayed in the viewfinder, when moved from the wide-angle end, the image size will change, but this is normal. • When the STABLE PIX function is engaged, the picture becomes rough. • When the STABLE PIX function is engaged, the angle of view at the wide-angle end becomes narrower. • It is recommended that you do not use the STABLE PIX function when using a tripod. The sensor would detect vibrations from the tripod in which case the picture would be blurred. INDEX SIGNAL RECORDING Indexing your tapes while recording makes it easy to find desired program segments when you play back the tape in a VCR that has a compatible indexing feature called the "VHS Index Search System". See your VCR's instruction manual for index playback instructions.