Hitachi VM-6400A Owners Guide - Page 33
Using The Built-in Camera Light Only For Vm-7400a
View all Hitachi VM-6400A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
USING THE BUILT-IN CAMERA LIGHT (Only for VM-7400A) - 33 - If you wish to exchange or copy some of your friend's favorite home recordings, the following instructions can be used to connect camcorder to VCR for this purpose. 1. Connect the audio/video cable to "AUDIO" and "VIDEO" of your camcorder. 2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in diagram above. 3. Play the tape on the camcorder and record it on the VCR. NOTE: If you connect the "VHF OUT TO TV" connector of VCR to the "TV ANT" connector, as illustrated and set "VCR/TV" selector of the VCR to "VCR" mode, the picture being dubbed by VCR can be monitored. ATTACHING THE OPTIONAL TELE OR WIDE CONVERTER LENS 1. Remove the lens hood. Turn the lens hood counterclockwise as shown in the figure. Or, attach the lens cap over the lens hood, then turn them counterclockwise to remove them. 2. Remove both caps of the telephoto or wide angle lens. 3. Screw the lens into the threads on the front of camcorder lens assembly. USING THE BUILT-IN CAMERA LIGHT (Only for VM-7400A) Use the built-in camera light if you wish to shoot objects in dark places. When "LIGHT" is set to "AUTO", the camera light turns on automatically when the camcorder is pointed at objects in a dark place and turns off when it is pointed at objects in a bright place. CAUTION: The power consumption of the built-in camera light is about a half that of the camcorder. Therefore, if the camera light is turned on when a fully charged battery pack is attached, the operating time of the battery falls to about a half.