HoMedics AR-10 User Manual - Page 6
Troubleshooting - replacement filter
View all HoMedics AR-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Remove the HEPA filter from the main unit. Fig. 7 4. Use the brush attachment with your vacuum cleaner. Run the attachment along both sides of the HEPA filter, cleaning thoroughly between the accordion folds of the filter. Fig. 8 5. Place the clean HEPA filter back in the main unit, making sure that it is firmly seated inside the unit. Fig. 9 10 6. Place the tabs at the bottom of the grill plate into the base of the unit. Gently push the grill plate back into place until you hear a click sound indicating that the grill is firmly latched. Fig. 10 DO NOT USE WATER OR ANY HOUSEHOLD CLEANERS OR DETERGENTS TO CLEAN THE HEPA FILTER. It is recommended that you replace the HEPA filter every 18 months to maintain the optimal performance of your air cleaner. To purchase the HEPA replacement filter, go back to your retailer (where you purchased your air cleaner) or visit www.homedics.com Troubleshooting Problem Unit will not operate Possible Cause • Unit is not plugged in • No power at unit Solution • Plug unit in • Press the POWER button to turn the power on • Check circuits, fuses, try a different outlet Reduced airflow or poor filtering • The front grill may be blocked • HEPA filter may be clogged • Check to make sure nothing is blocking the front grill and air outlet • Check and clean filter • Replace the filter Excessive noise • The unit is not level 11 • Place the unit on a flat, even surface