HoMedics BDY-300 User Manual - Page 4

HOW TO USE BEFORE TURNING THE UNIT ON Make sure the unit is fully charged. CHARGING THE BATTERY Before turning the unit on, plug the charging cord into the charging port and the other end into a household electrical outlet or USB port. The LED indicator will illuminate indicating that charging is taking place. When charging is complete, the LED indicator will turn off. It takes 2 hours for a full charge, which will provide approximately 8 hours of use, dependent on power levels used. When the battery is getting low, the LED indicator will flash continuously for 30 seconds, indicating that the unit needs to be recharged. LOCKING THE UNIT You may choose to lock your body cleanser during traveling or transporting. To lock the unit, press and hold both the and buttons for 2-seconds. The unit will vibrate and the LED indicator will flash once. To unlock the unit, press and hold both the and buttons again for 2-seconds. The unit will vibrate and the LED indicator will flash once, indicating that the unit is now unlocked. NOTE: Fully charging the unit will automatically unlock the unit when it is in Locked Mode. HOW TO USE CLEANSING TREATMENT ROUTINE • Wet your skin and apply your usual cleansing product. • Before use, be sure the charging port cover is fully plugged into the charging port. Press and hold the Power ON/OFF button for 2-seconds to turn the unit on. The unit default intensity setting is level 5. • Gently press the unit to your skin and begin cleansing in a circular motion. • In each of the areas cleansed, adjust the intensity to the level that is most comfortable. • To increase the intensity, press the + button. The LED will blink 3-times to indicate it has reached the highest level. • To decrease the intensity, press the - button. The LED will blink 3-times to indicate it has reached the lowest level. • To turn the unit OFF, press and hold the Power ON/OFF button again for 2-seconds 6 7