HoMedics NMSQ-TL User Manual - Page 3

• This appliance is designed for household use only. • Use heated surfaces carefully. May cause serious burns. DO NOT use over insensitive skin areas or in the presence of poor circulation. The unattended use of heat by children or incapacitated persons may be dangerous. SAVE THESE INSTRUCTIONS Caution: Please read all instructions carefully before operating. • If you have any concerns regarding your health consult your doctor before using this product. • In case of pregnancy, diabetes, pacemaker use, illness or any medical condition, consult your doctor before using massager. • NEVER leave the appliance unattended, especially if children are present. • NEVER cover the appliance when it is in operation. • DO NOT use this product for more than 15 minutes at a time. • Extensive use could lead to the product's excessive heating and shorter life. Should this occur, discontinue use and allow the unit to cool before operating. • NEVER use this product directly on swollen or inflamed areas or skin eruptions. • This product is a non-professional appliance designed to provide soothing massage to worn muscles. DO NOT use this product as a substitute for medical attention. • DO NOT use this product before bed. The massager has a stimulating effect and can delay sleep. • NEVER use this product while in bed. • This product should NEVER be used by any individual suffering from any physical ailment that would limit the user's capacity to operate the controls. • This unit should not be used by children or invalids without adult supervision. • NEVER use this product while driving an automobile. Battery Precautions • Use only the size and type of batteries specified. • When installing batteries, observe proper +/- polarities. Incorrect installation of batteries may cause damage to the unit. • Do not mix different types of batteries together (e.g., alkaline with carbon-zinc or old batteries with new ones). • If the unit is not going to be used for a long period of time, remove batteries to prevent damage due to possible battery leakage. 4 fig. 1 fig. 2 HEAT LOW HIGH MASSAGE fig. 3 fig. 4 Instructions for Use Adaptor Instructions 1.Insert adaptor plug into the control pad. (Fig. 1) This unit incorporates a wire frame allowing you to contour the unit to your neck. (Fig. 2) 2.Plug into a AC 120-volt outlet. 3.Place massager on your neck and mold the wire framing to desired position. (Fig. 2) 4.To activate the massage action, press the massage button on the control pad. (Fig. 3) 5.Press once for high speed, a second time for low, and press again to turn the unit off. 6.To activate the heat function, with massage running, press the heat button on the control pad. (Fig. 3) The LED illuminator will glow red. 7.To turn off the heat function, simply press the heat button again. Optional Battery Instructions Please note: Batteries will only operate the massage function. You must use the adaptor to activate the heat function. 1.Locate the zipper on the back of the unit. 2.Unzip to expose the battery compartment, remove lid.(Fig. 4) 3.Insert 4 "AA" batteries. (Proper battery orientation is noted inside the battery compartment housing.) 4.Replace the cover and zip the back portion back up, making sure both zipper ends are touching each other to ensure zipper is closed properly. 5.To activate massage, follow steps 2 - 5 from adaptor instructions. Note: The micropedic™ bead pouch is designed to provide cushioning for extra support. It can be removed from the nylon / spandex sleeve if needed. By doing this, you will slightly increase the strength of the massage on your neck and shoulders. 5