HoMedics PAR-350 Downloadable Instruction Book - Page 4
Paraffin Bath - paraspa plus
View all HoMedics PAR-350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Maintenance: Periodically, the used portion of paraffin wax should be replaced and the unit should be cleaned. 1. Unplug unit and remove grate. Allow paraffin wax to solidify overnight. 2. P ush on one end of paraffin wax block. This will tip it up. Lift the block out of the unit and dispose of it. DO NOT USE SHARP OBJECTS TO REMOVE THE PARAFFIN WAX BLOCK, THIS MAY SCRATCH OR DAMAGE THE TUB. If the paraffin wax does not remove easily, plug unit in and allow to heat for 10-15 minutes, then remove the paraffin wax block and unplug the unit. 3. Wipe the inside of the unit with a disposable towel to remove residual dirt and paraffin. 4. With a damp, soapy cloth, wipe clean. DO NOT POUR WATER INTO THE UNIT, OR IMMERSE THE UNIT IN WATER. 5. Store in a cool, dry place. When you are ready to re-use the ParaSpa Plus paraffin bath for the next heat treatment, repeat steps 2-7, "How to set up the ParaSpa Plus unit". Then, follow steps 1-6, "How to use the paraffin treatment." ParaSpa™ Plus Paraffin Bath Grate Heating Light Indicates wax is melting Ready Light Indicates wax is ready for use Tub Lid With locking mechanisim 3-1lb. Bags of Paraffin Wax 20 Plastic Liners 6 7