HoMedics PED-1200 User Manual - Page 4
Troubleshooting, Changing The Rollers, Cleaning And Care
View all HoMedics PED-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
CHANGING THE ROLLERS TO REMOVE THE ROLLER 1. Ensure the switch is in the OFF position. 2. With one hand press the release button on the side of the device. 3. With the other hand lift out the roller. TIP: It's easier to lift the roller out from the end closest to the release button. TO INSERT A NEW ROLLER 1. Loosely position one of the roller pins into the recess on the end furthest from the release button. 2. Push the other end of the roller into place using the groves to guide it into position. 3. The roller will secure into place with a click CLEANING AND CARE Always turn the device off and remove the batteries before cleaning. TO CLEAN THE SURFACE Clean the surface of the unit with a clean, damp, soft cloth • NOTE: Never allow water or any other liquids to come in contact with the unit • Only clean the rollers with the supplied brush • Never use abrasive cleaners to clean the unit 6 CLEANING AND CARE TO STORE • Remove batteries if equipment is not going to be used for extended periods of time. • Place the components into its box and store in a safe, dry place BATTERY PRECAUTIONS • Do not mix old and new batteries. • Use only the size and type of batteries specified. • Do not dispose of batteries in fire. Batteries may explode or leak. • When installing batteries, observe proper +/- polarities. Incorrect installation of battery may cause damage to the unit. • Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. • Clean the battery contacts and also those of the device prior to battery installation. • Remove used batteries promptly. • If the unit is not going to be used for a long period of time, remove batteries to prevent damage due to possible battery leakage. • Recycle or dispose of properly in accordance with all local, state, province, and country regulations. TROUBLESHOOTING PROBLEM Motor power seems reduced POSSIBLE CAUSE • Low batteries Roller surface appears worn or less abrasive • Dirty • Roller needs replacing SOLUTION • Replace the batteries • Brush clean with cleaning brush (included) • Replace the roller 7