HoMedics UHE-WM130-BK User Manual - Page 11
Cleaning And Care
View all HoMedics UHE-WM130-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
CLEANING AND CARE CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet. CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE The transducer/ultrasonic membrane must be cleaned to remove water mineral deposits when "CLEAN" is illuminated on the display. Failure to do so may cause reduced or no mist output. 1. Remove both water tanks from the humidifier base and set aside. Transducer cover Transducer/ultrasonic membrane 2. Remove the transducer cover. Clean the transducer/ultrasonic membrane with a 50/50 mix of white vinegar and water on a cotton swab. Wipe off with a damp cotton swab. Replace the transducer cover. Press and hold the power button until the "CLEAN" light turns off. NEVER touch the transducer/ultrasonic membrane with your fingers; the natural oils in the skin can damage the surface. NEVER submerge the base in water or any other liquid. NOT FOR USE WITH ESSENTIAL OILS TO CLEAN THE TANKS Remove the water tanks from the humidifier base by lifting them from the main unit. Unscrew the tank caps and rinse inside the tanks with clean water. Every day: Empty and rinse each tank and tank cap before refilling. Every week: To remove any scale or buildup, use a 50/50 mixture of white vinegar and lukewarm water to clean the inside of the tanks. 11