Honeywell 2020-5 User Guide - Page 68
Read Time-Out Serial Trigger Mode, Image Scanner Power Time-Out Timer
View all Honeywell 2020-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Read Time-Out (Serial Trigger Mode) Use this selection to set a time-out (in milliseconds) of the image scanner's trigger when using serial commands to trigger the image scanner. Once the image scanner has timed out, you can activate the image scanner either by pressing the trigger or using a serial trigger command. After scanning the Read Time-Out bar code, set the time-out duration (from 0-300,000 milliseconds) by scanning digits on the Programming Chart inside the back cover, then scanning Save. Default = 30,000 ms. Read Time-Out Image Scanner Power Time-Out Timer Note: The Image Scanner Power Time-out Timer option only applies to Manual/ Serial Trigger. When there is no activity within a specified time period, the image scanner enters low power mode. Scan the appropriate Image Scanner Power Time-Out bar code to change the time-out duration (in seconds). Note: Scanning zero (0) is the equivalent of setting no time-out. 3 - 4