Honeywell 2072 Operation Guide - Page 3

Opening Your Safe Programming your The Passcode set at the factory is 159A. Personal Passcode Use this Passcode the first time you open the safe. You can program your own Passcode. For your security, change the factory-set 1. Enter the Passcode on the keypad. Passcode (159A) immediately. The green LED lights. 2. Model 2025 - Turn the opening knob (Fig. 1) within 5 seconds, to the right Setting Your Passcode: 1. Press 159A (factory preset Passcode) (Fig. 2) and pull the door open. If you and open the door. take no action within 5 seconds, the 2. Locate the red button on the inside lower safe automatically relocks. edge of the door (Fig. 8). 3. Models 2072/2073 - Insert the Entry 3. Press the button; then release it and you will Key into the key lock (Fig. 3), turn to hear a beep. the right (Fig. 4), and pull the door open. 4. Now press between 3 and 8 numbers that If you take no action within 5 seconds, you wish to use as a Passcode, and the safe automatically relocks. confirm by pressing the letter "B". Be sure 4. If batteries fail or you forget the Passcode, entry to the safe can be made using the Emergency Override Key. to write them down immediately, so you don't forget how to open the safe. 5. Your Passcode alone will now open the Safe; The factory preset Passcode will no longer open the Safe. Emergency Override Key: 6. To open the Safe, push the numbers you Model 2025 - Remove the override lock have selected followed by the letter "A". cover (Fig. 5), insert Emergency Override Key, turn to the right and pull door open. Models 2072/2073 - Insert Emergency Override Key into the key lock (Fig. 7), turn to the left and pull door open. Closing and Securing your Safe Do not over-fill the safe or obstruct the door from completely closing. Closing the Door: 1. Close the safe door. 2. Model 2025 - To lock the safe, turn the opening knob to the left (Fig. 6). 3. Models 2072/2073 - To lock the Safe, turn the Entry Key to left (Fig. 7) and remove key. 4. To re-open, enter your Passcode. Security Lockout: The safe is designed to lock-out the keypad if the wrong Passcode is entered multiple times. • After 3rd error: 20 second lock-out • 3 more errors: 5 minute lock-out • 3 more errors: 1 hour lock-out You can always use the Emergency Override Key to open the safe. See Opening Your Safe for instructions. English 2