Honeywell 2072 Operation Guide - Page 5

Checking Batteries Checking Batteries On the keypad, press B. • If the red LED flashes, change the batteries within 2 months. • If no LED lights, change the batteries immediately. Changing Batteries Changing batteries will not erase your Passcode. 1. Open the safe door and find the battery compartment on the back. 2. Model 2025 - Push on small tab (Fig. 9) and pull the cover off. 3. Models 2072/2073 - Slide the cover off the battery compartment (Fig. 10). 4. Properly replace batteries and put cover back into place. Appropriate Use of Your Safe • Your Anti-Theft safe™ is designed to provide protection against theft and minimal fire damage. It does not protect the contents from serious fire or water damage. • For information on safes that provide protection from fire and water damage, see your Home Security retailer or visit our website at www.HoneywellSafes.com Troubleshooting Cont. • No LED Lights: Model 2025 - Open the safe by removing the Emergency Override Lock cover (Fig. 5) and inserting the Emergency Override Key, and change batteries. See Checking/Changing Batteries. Models 2072/2073 - Open the safe by inserting the Emergency Override Key into the key lock (Fig.7), open safe and change batteries. See Checking/ Changing Batteries. Troubleshooting • Safe will not open with your Passcode: Open the safe using the Emergency Override Key and re-program your Passcode. See Opening Your Safe and Programming Your Personal Passcode. If you continue to experience problems or have questions regarding your safe, please contact SISCO Customer Service at 800-223-8566. Do not return safe to the retailer unless instructed to do so by Customer Service Representative. Thank you! English 4