Honeywell 3800G14E User Manual - Page 22
Resetting the Standard Product Defaults
View all Honeywell 3800G14E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Reading Techniques The imager has a bright red aiming beam that corresponds to its horizontal field of view. The aiming beam should be centered horizontally over the bar code; it will not read if the aiming beam is in any other direction. Good Technique Bad Technique Bad Technique The best focus point for reading most code densities is about 5 inches (12.7 cm) from the unit. To read a single bar code or multiple bar codes (on a page or on an object), hold the imager at an appropriate distance from the target, pull the trigger, and center the aiming beam on the bar code. Resetting the Standard Product Defaults If you aren't sure what programming options are in your imager, or you've changed some options and want the factory settings restored, scan the Standard Product Default Settings bar code below. Standard Product Default Settings The Menu Commands starting on page 11-5 lists the factory default settings for each of the commands (indicated by an asterisk (*) on the programming pages). 1 - 8 3800g User's Guide