Honeywell 6165EX Installation Instructions - Page 1
Honeywell 6165EX Manual
View all Honeywell 6165EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Honeywell Power Products 12 Clintonville Road Northford, CT 06472 http://www.honeywellpower.com HPS3 PRODUCT INSTALLATION DOCUMENT PN 52231:B 11/09/2004 ECN 04-580 HPS3: Power Supply/Charger 1 Introduction The HPS3 Power Supply/Battery Charger converts a low voltage AC input into an output of 6 VDC, 12 VDC or 24 VDC @ 2.5 amps of continuous supply current (refer to the Specifications section). This general purpose switching power supply can provide additional power for a variety of applications such as access control, security and CCTV system accessories. 2 Specifications HPS3.wmf • DIP Switch selectable for 6 VDC, 12 VDC or 24 VDC output. DC LED • 2.5 amps of continuous supply current*. TB1 • Output is filtered and electronically regulated. DC + • Built-in charger for sealed lead acid or gel type batteries. • Maximum charge current of 400 mA. If a battery charger is used, subtract max charge current of 400 mA from total to determine allowable load. • Automatically switches to stand-by battery upon AC fail. DC - BAT + BAT - AC • Battery protected from short circuits. AC • Thermal and short circuit protection with auto reset. AC LED SW1 • LED indicators for AC input and DC output. • Compact design (board dimension 3.5"L x 3.0"W x 2.0"H). • Battery leads and foam mounting tape included. *Specified at 25ºC ambient. 3 Voltage Output and Transformer Selection: Output Voltage SW1 DIP Switch Switch 1 Switch 2 Transformer Requirements 6 VDC ON OFF 16 VAC / 40 VA (model HTP1640) 12 VDC OFF OFF 24 VAC / 50 VA (model HTP2450)* 24 VDC OFF ON 28 VAC / 100 VA / (model HT28100) *Transformers are sized for maximum load at rated voltage output. Greater voltage output is possible with a larger transformer. IMPORTANT! Transformers with higher power (VA) ratings may be used for all output voltages selected above provided the input voltage does not exceed 28VAC.