Honeywell DT7235 User Guide - Page 2

DDT-T-7722335/5/DDT-T-77223355TT DDUAL TEC® Motion Sennssoorr ISnusptpallleatmieonnt IalnIsntfrourctmiaotinosn DETECTION PATTERNS DT-7235 / DT-7235T Pet Immune Lens 11 m (35') * Look-down fingers are enabled only when lookdown mask is removed, see Step 1. MICROWAVE SUPERVISION If the microwave technology stops sending or receiving signals, the sensor locks into an alarm condition. The LED at the sensor, however, does not light. If the microwave regains its signal, the sensor (and LED) returns to normal operation. NOTE: The DT-7235/7235T sensors should be tested at least once each year to ensure proper operation. SPECIAL INSTRUCTIONS FOR INSTALLATIONS CONTAINING PETS To take full advantage of the pet immunity the following guidelines should be followed: • Mount the center of the detector 7'6" (2.3 m) high. • Ensure that the look-down mask is in place (see Step 1). • Mount where animals cannot come within six feet of the detector by climbing on furniture, boxes or other objects. • Do not aim the detector at stairways that can be climbed by animals. Notes: This sensor will provide immunity to false alarms for an individual animal or a group of animals whose total weight is equal to or less than 45.36 kg (100 lbs). The pet immunity function of this sensor has not been evaluated by UL. FCC Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by Honeywell may void the user's authority to operate this equipment. IC Notice: This apparatus complies with Canadian Standards ICES-003 B and RSS-210. Canada: Wiring methods shall be in accordance with CSA C22.1, Canadian Electrical Code, Part 1, Safety Standard for Electrical Installations. PRODUCT SPECIFICATIONS Range: 35' x 40' (11 m x 12 m) UL Limits: 35' x 35' (11 m x 11 m) Alarm relay: Energized Form A 500 mA, 30 VDC Tamper (DT-7235T): (NC) 50 mA, 24 VDC Power requirements: 7.5 - 16 VDC (UL: 8.9-14.5VDC), 25 mA, 0.4W AC Ripple: 3 V peak-to-peak at nominal 12 VDC Frequencies: 24.125 GHz PIR white light immunity: 6,500 Lux typical RFI immunity: 30 V/m,10 MHz - 1000 MHz Operating temperature: +14o to +131o F (-10o to +55o C) 5 - 95% relative humidity (non-condensing) (Indoor use environment) PIR fields of view: 44 long range edges 36 intermediate edges 18 lower edges 4 down edges Dimensions: 11.9 cm H x 7.1 cm W x 4.2 cm D (4.685" H x 2.795" W x 1.654" D) Sensitivity: 2 - 4 steps within field of view Accessories: Optional Lens Kits -- Pet Alley Lens Kit (P/N DT7000-PALK) Long Range Lens Kit (P/N DT7000-LRLK) High Security Lens Kit (P/N DT7000-HSLK) Note: The function of these optional lenses with this sensor has not been evaluated by Underwriters Laboratories Inc. Mounting Brackets -SMB-10 Swivel Mount Bracket (P/N 0-000-110-01) SMB-10C Swivel Mount Ceiling Bracket (P/N 0-000-111-01) SMB-10T Swivel Mount Bracket w/Tamper (P/N 0-000-155-01) Approvals / listings: FCC IC cULus © 2004 Honeywell International Inc. - Honeywell, IntelliSense and DUAL TEC are registered trademarks of Honeywell International Inc. All other trademarks are the properties of their respective owners. All rights reserved. Made in China 5-051-563-00 Rev J