Honeywell F58F Owner's Manual - Page 14
Replacing electronic, air cleaner components, STEP 1, STEP 2, STEP 3, STEP 4, STEP 5
View all Honeywell F58F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Replacing electronic air cleaner components STEP 1 Inspect the cells for broken ionizer wires and bent collector plates. Repair as necessary or take to a Honeywell Authorized Air Cleaner Repair Station. STEP 2 Slide the prefilters into the upstream prefilter guides. STEP 3 Slide the air cleaner cells in so the air flow arrow points downstream and the handles face outward. STEP 4 Firmly close the access door. STEP 5 Turn on the air cleaner. If the cells and prefilters are wet, the neon light may not come on and you may hear arcing. If the arcing is annoying, simply turn the air cleaner off for 2-3 hours or until the cells are dry. If your air cleaner has an Air Cleaner Monitor, the FAULT indicator may activate if you install wet cells and prefilters. Again, if the neon light or the FAULT indicator annoys you, simply turn off the air cleaner for 2-3 hours or until the cells and prefilters are dry. M3582 69-0764-2 12