Honeywell F58F Owner's Manual - Page 5
Operating Your Electronic Air Cleaner
View all Honeywell F58F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
OPERATING YOUR ELECTRONIC AIR CLEANER Set the ON-OFF switch in the power box to ON. NOTE: Depress 1 for ON, 0 for OFF. The air cleaner will now operate whenever your furnace/air conditioning system fan operates. For M3584 maximum air cleaning benefit and cleaner air conditioner coils, leave the air cleaner switch ON at all times and the fan switch on your thermostat ON. Of course, continuous fan operation will add to your electric bill each month. M3586 ON BATTERY SERVICE FAULT Air Cleaner Monitor M11980 M 6032 When the fan and air cleaner come on, the neon indicator lights. If your air cleaner is equipped with a wallmounted W8600F Air Cleaner Monitor (see page 2), the ON indicator will be active whenever the air cleaner is in operation. Of course, the system fan will also be running. You may hear a snapping (electrical arcing) sound occasionally as the air cleaner operates. This usually is caused by a larger dust particle causing a high voltage discharge. The snapping sound means that your air cleaner is working as it should. To hear the snapping sound, momentarily press the test button near the bottom of the door. Use the test button any time you want to prove air cleaner operation. M16001 ON BATTERY SERVICE FAULT Air Cleaner Monitor When the fan and air cleaner stops, the neon light goes out, as does the ON indicator on the W8600F. The air cleaner is off until the heating or air conditioning and fan start again. M11981 3 69-0764-2