Honeywell HCCM474M User Manual - Page 32
Lens Installation And Adjustment
View all Honeywell HCCM474M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
LENS INSTALLATION AND ADJUSTMENT DC VIDEO LENS PWR SET VIDEO ~ ~ GND 12VDC/24VAC CLASS2 When using an auto-iris lens, install the accessory lens plug on to the lens cable as follows. Video type lens ; Set lens switch to VIDEO. Connect the lens cable of a video type lens. If the plug on the cable is of a different type, replace it with the provided 4-pin iris plug. +12V Video input 1 3 2 4 N.C GND HCCM474M Pin Assignment : Video type (4-pin) 1 3 Pin No. Signal 1 +12V DC (50mA max.) 2 N.C (Not connected) 3 Video (0.7Vp-p, high impedance, no sync) 2 4 4 GND REV. B 32 HCMU000878 12/29/03
REV. B
32
HCMU000878
12/29/03
LENS INSTALLATION AND ADJUSTMENT
PWR
SET
LENS
PWR
SET
LENS
HCCM474M
DC
VIDEO
VIDEO
12VDC/24VAC
CLASS2
GND
~
~
When using an auto-iris lens, install the accessory
lens plug on to the lens cable as follows.
Video type lens ; Set lens switch to VIDEO.
Connect the lens cable of a video type lens.
If the plug on the cable is of a different type, replace
it with the provided 4-pin iris plug.
1
2
4
3
Pin Assignment : Video type (4-pin)
Pin No.
Signal
1
+12V DC (50mA max.)
2
N.C (Not connected)
3
Video (0.7Vp-p, high
impedance, no sync)
4
GND
+12V
N.C
Video input
GND
1
3
2
4