Honeywell HCM-2051 Owner's Manual - Page 5

FILLING CONTINUED • Place the Motor Housing back into the base. • Position the Water Tank in the humidifier and push into place. Some water will empty into the base. • Once the filled tank has been positioned, do not attempt to move the humidifier. If it has to be moved, unplug the humidifier and remove the water tank first. CAUTION: DO NOT POUR WATER INTO THE GRILLE ON TOP OF THE HUMIDIFIER. DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY. OPERATION POWER CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN ELECTRICAL SHOCK COULD OCCUR. • With the power switch in the OFF position, plug the filled humidifier into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way. HUMIDITY CONTROL Fig. 4 1. Set the fan speed to the desired position (Fig. 4). HIGH: For fast humidifying MED: For everyday moisture control LOW: For quieter nighttime operation 2. Set the Moisture Control knob (Humidistat) to the highest setting by turning the dial clockwise to No. 9 (Fig. 4). NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Moisture Control may be set too low. Turn the dial clockwise to No.9. This is the highest setting. The Desired Humidity light will be Off when the unit is producing moisture (Fig. 4). Turn the humidifier OFF if the humidity level feels too moist or you notice condensation forming on the walls and/or windows.