Honeywell HPF24S6 Installation Manual - Page 11

Auxiliary Special Application Power Output - TB4 Terminals 9 + & 10

Get Honeywell HPF24S6 PDF manuals and user guides View all Honeywell HPF24S6 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Specifications System Overview Control Input Circuits - TB4, Terminals 3 (+) & 4 (-) and 7 (+) & 8 (-) • Trigger Input Voltage: 9 to 32 VDC • Input Current Draw in Alarm Polarity: - 16 to 32 volts, 16.0 mA maximum per input - 9 to 16 volts, 6.0 mA maximum per input NAC/Output Circuits - TB2, Terminals 1 (+) & 2 (-), 3 (+) & 4 (-), 5 (+) & 6 (-) and 7 (+) & 8 (-) alarm polarity • Supervised and power-limited (Class 2) • Voltage Rating: 24 VDC filtered • Current: - Maximum for any one circuit - 3.0 amps special application, 300mA regulated - Maximum total continuous current for all output: HPF24S6 - 4.0 amps HPF24S8 - 6.0 amps - Maximum total short term current (one hour maximum) for all outputs: HPF24S6 - 6.0 amps HPF24S8 - 8.0 amps • Output Circuit Types: - Four Style Y NACs (require 4.7 KEnd-of-Line Resistors) or Style Z NACs using the optional ZNAC-4 Class A converter module OR - Four resettable or nonresettable 24 VDC power outputs • Refer to the HPP Device Compatibility Document #54399 for listed compatible devices. • For wiring requirements, refer to "Wire Requirements" on page 43. Trouble Relay Contact Rating - TB5 • Fail-safe Form-C relay (normally energized, transfers with loss of power) • 5.0 amps @ 24 VDC or 5.0 amps @ 30 VAC Secondary Power (battery) Charging Circuit - JP4 • Supervised, nonpower-limited • Supports lead acid type batteries only • Float Charge Voltage: 27.6 VDC • Maximum Charge Current: 1.5 A • Battery fuse (F1) 15A, 32V (Canadian version is nonreplaceable 12A, 32V) • Maximum Battery Capacity: 18.0 AH • Minimum Battery Capacity: 7.0 AH • Power supply draws maximum standby current of 65 mA from batteries Auxiliary Special Application Power Output - TB4 Terminals 9 (+) & 10 (-) • Special application power • Power-limited (Class 2), nonsupervised • Voltage Rating: 24 VDC • Current: - 170 mA maximum with internal 7.0 Amp Hour batteries - 500 mA maximum with external 18.0 Amp Hour batteries HPF24S Series Power Supplies - P/N 52751:F2 7/11/2014 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
HPF24S Series Power Supplies —
P/N 52751:F2
7/11/2014
11
Specifications
System Overview
Control Input Circuits
- TB4, Terminals 3 (+) & 4 (-)
and 7 (+) & 8 (-)
•
Trigger Input Voltage: 9 to 32 VDC
•
Input Current Draw in Alarm Polarity:
–
16 to 32 volts, 16.0 mA maximum per input
–
9 to 16 volts, 6.0 mA maximum per input
NAC/Output Circuits - TB2, Terminals 1 (+) & 2 (-), 3 (+) & 4 (-), 5 (+) & 6 (-) and
7 (+) & 8 (-) alarm polarity
•
Supervised and power-limited (Class 2)
•
Voltage Rating: 24 VDC filtered
•
Current:
–
Maximum for any one circuit - 3.0 amps special application, 300mA regulated
–
Maximum total continuous
current for all output:
HPF24S6 - 4.0 amps
HPF24S8 - 6.0 amps
–
Maximum total short term
current (one hour maximum) for all outputs:
HPF24S6 - 6.0 amps
HPF24S8 - 8.0 amps
•
Output Circuit Types:
–
Four Style Y NACs (require 4.7 K
End-of-Line Resistors) or
Style Z NACs using the optional ZNAC-4 Class A converter module
OR
–
Four resettable or nonresettable 24 VDC power outputs
•
Refer to the
HPP Device Compatibility Document #54399
for listed compatible devices.
•
For wiring requirements, refer to “Wire Requirements” on page 43.
Trouble Relay Contact Rating - TB5
•
Fail-safe Form-C relay (normally energized, transfers with loss of power)
•
5.0 amps @ 24 VDC or 5.0 amps @ 30 VAC
Secondary Power (battery) Charging Circuit
- JP4
•
Supervised, nonpower-limited
•
Supports lead acid type batteries only
•
Float Charge Voltage: 27.6 VDC
•
Maximum Charge Current: 1.5 A
•
Battery fuse (F1) 15A, 32V (Canadian version is
nonreplaceable
12A, 32V)
•
Maximum Battery Capacity: 18.0 AH
•
Minimum Battery Capacity: 7.0 AH
•
Power supply draws maximum standby current of 65 mA from batteries
Auxiliary Special Application Power Output - TB4 Terminals 9 (+) & 10 (-)
•
Special application power
•
Power-limited (Class 2), nonsupervised
•
Voltage Rating: 24 VDC
•
Current:
–
170 mA maximum with internal 7.0 Amp Hour batteries
–
500 mA maximum with external 18.0 Amp Hour batteries